commercial tube heaters * commercial patio heaters * Fostoria Tube Heater * wall heaters

Economical

Our tube heaters can reduce your heating bill 20% to 50%. The system can pay for itself in a few short years. Heaters are easy to install and require very little maintenance.

Effective

The Fostoria Tube Heater operates on the same principle as the sun warming the earth. The result is quiet, soft, radiant heat with no drafts. Heat the floor zone, not the ceiling.

System Features:

• CSA Design Certified (Formerly A.G.A)
• Straight, U, or L-Shaped Systems
• Versatile - 8 BTU/H Inputs /15 Tube Lengths
• Minimal Field Assembly
• Burner:
• 40-200 MBTU/H (N or LP gas)
• 120V controls with hot surface Ignition and 100 % Safety Lockout.
• Single Pressure Switch Operation
• Enclose Blower(fan with Thermal Overload Protection and Balanced Air Rotor)
• Outside Combustion Air Collar
• Corrosion Resistant Powder- Coated Enclosure
• Operational indicator Lights
• Site Lens for Viewing Flame / Glow Bar Operation
• High Altitude Models (75-150MBTU/H)

Heat Exchanger & Reflector:

• 16 ga. /4 Alumi-therm Steel Combustion Chamber (1 st 10' or 20')
• 16 ga. /4" Hot Rolled Black Steel Emitter Tube(s)
• Optional 16 ga. /4" Aluminized Black Coated Emitter Tube(s)
• Aluminized Steel Turbulator Baffle for Max. Efficiency
• Milled Aluminum Reflectors Individually Adjustable to 45 °
• Reflector End Caps for Increased Efficiency
• Wire Form Hangers that Open for Ease of Installation
• Mounting Chains and S-Hooks Included
• (Allows for 2' Suspension)

Heat Exchanger & Reflector:

• 16 ga. /4 Alumi-therm Steel Combustion Chamber (1 st 10' or 20')
• 16 ga. /4" Hot Rolled Black Steel Emitter Tube(s)
• Optional 16 ga. /4" Aluminized Black Coated Emitter Tube(s)
• Aluminized Steel Turbulator Baffle for Max. Efficiency
• Milled Aluminum Reflectors Individually Adjustable to 45 °
• Reflector End Caps for Increased Efficiency
• Wire Form Hangers that Open for Ease of Installation
• Mounting Chains and S-Hooks Included
• (Allows for 2' Suspension)

Accessories:

• Chain Mounting Kit, (item #8886000)
• (Consists of (2) 8' Chains & (4) 'S' Hooks)
• Flexible Gas Supply Hose, (item #1321414)
• (24" Stainless Steel without Shutoff Value)
• Side Wall Vent Kit, (item #8886200)
• (Consists of Type "B" Draft Hood Connector, Vent Cap, Wall Thimble and 18" Length Vent Pipe)
• Roof Vent Kit, (Item #8886700)
• Consists of Type "B" Vent Cap, Roof Flashing,
• Storm Collar and 12" Length Vent Pipe)
• Un vented Outlet Cap, (item #8886300)
• (4" O.D. with Flapper)
• Inlet Cap, (item #8886400)
• (4" O.D. with Bird Screen for Outside Combustion Air)
• 90° Elbow Kit, (item #8880000)
• (90° Elbow, Coupler & 2 End Caps)
• Line Voltage Thermostat- Model TW141, (item #2609802)
• (120 Volt, Single Pole, 22 amps)
• 24V Control Kit
• Reflector End Caps(Qty. 2), (item #8880200)