|
Calcana Infrared Patio Heating Systems


|
Experience a Calcana Heatwave
on your patio today!
DESIGN FEATURES INCLUDE:
SAFELY ENCLOSED FLAME:
The flame is protected from wind and is located inside
the Low Intensity Infrared Emitter Tube. This tube
captures heat energy contained in hot glue gases and turns
the energy into comfortable HEAT waves.
LOW CLEARANCE TO COMBUSTABLES:
Can be safely installed in locations with awnings.
SLIM, NARROW DIMENSIONS:
Easy to install in narrow, low overhead clearance
locations; suitable for long, narrow street side patio locations.
OVERHEAD DESIGN:
No floor space is lost as units hang from existing
trellis or other overhead structures. Units can also
mount to walls at an angle.
VARIABLE INPUT BURNER:
Patent pending, variable input design provide the
right level of heat output for each location.
FOUR LENGTHS TO CHOOSE FROM:
5, 10, 15 &20 FOOT LENGTHS ARE AVAILABLE. Multiple
units can be grouped together to achieve any length required.
EXCLUSIVE PERIMETER POST & TRAC SYSTEM:
Provides an overhead installation solution without
compromising floor space. Architectural and functional
design allows for easy customization. Lighting, audio
speakers and flower baskets can be easily attached to the
structure.
CERTIFIED FOR OUTDOOR & INDOOR APPLICATIONS:
Units are design certified to operate in outdoor
environments, which include wind, rain, snow and temperatures
as low as -40F. For indoor applications, the units
can be safely vented through the wall or roof.
EASY-LIGHT IGNITION SYSTEM:
No pilot lights to ignite by hand, no valves to turn,
no thermocouples to replace. By using a reliable, 3-Try,
direct spark, electronic, 100% safety shut off, ignition
system, units safely and consistently operate in all types
of weather with the flick of a switch.
LOCAL OR REMOTE CONTROL:
Heaters can be operated remotely, or controls can
be located on the units.
LOW MAINTENANCE:
No ceramic parts to break, or replace. Not
thermocouples to replace. Emitter tubes do not glow
cherry red, therefore are not fatigued to the point of premature
failure.
ECONOMICAL TO OPERATE:
Highly efficient reflectors capture the radiant energy,
and direct it to the patio area. Heats more area with
less fuel than any other style of patio heater.
HEAVY DUTY CONSTRUCTION:
High quality materials & workmanship eliminates
metal fatigue and reflector warp or separation. Stainless
Steel options are available.
NATURAL GAS OR PROPANE:
Units available for use with either fuel.
Click
Here for more info |
  
  
|
 
 
Top


|
BIG SPRING TIME SALE!!!!!!
PATIO PAL GAS-FIRED HIGH INTENSITY
INFRA-RED PATIO HEATER
Designed to add warmth to outdoor patio applications, the Patio-
Pal® infra-red heater is the perfect solution to stylishly
extend the
outdoor season to many commercial and residential applications.
The Patio-Pal® easily mounts out of the way and without the
hassle of refilling propane tanks. Specifically designed for
comfort,
reliability and ease of installation, the Patio-Pal® is sure
to deliver the
desired amount of warmth for dining, entertainment or work areas.
Product
Features:
• CSA Design Certified for Indoor & Outdoor Use.
• Decorative Aluminum Grill with Stainless Steel Frame.
• Wind and Rain Protected Design.
• 28,000 to 34,000 BTU Inputs. Natural or Propane Gas.
• Power Assist Fan and Reliable Direct Spark Ignition.
• Power Cord Connection with Potted Circuitry.
• Housing Available in Powder-Coated Aluminized Steel or Brushed 304 Series
Stainless Steel.
Typical Applications:
• Restaurant Patios
• Entrance Ways
• Outdoor Living Spaces
• Vestibules
• Valet Waiting Areas
• Smoking Areas
PRODUCT SPECIFICATIONS
| BTU Range: |
28, 31, & 34 MBH |
| Gas Type: |
Natural or Propane |
| Certification: |
CSA Indoor/Outdoor |
| Limited Warranty: |
1 year controls, 3 years burner |
| Gas Connections: |
3/8” NPT |
| Manifold: |
5” Natural or 10” Propane |
| Minimum: |
6” Natural or 11” Propane |
| Maximum: |
14” Natural or 14” Propane |
| Volts: |
120V primary required (3-prong cord) |
| Amps: |
.25 starting, .24 running |
| Control Voltage: |
120V standard |
PH SERIES ADD-ONS & ACCESSORIES
Part No. |
Description |
|
PH-BKT |
Adjustable mounting bracket (black powder-coated). Pre-set
hardware allows the PH Series heater to be installed at
an angle between 0-30 degrees from horizontal. Includes
two (2) wall brackets, two (2) connecting arms, nuts, bolts
and washers. Sold in pairs. NOTE: Clearance to combustibles
must be maintained at all times. |

|
PH-BKT-SS |
304 Series stainless steel PH-BKT. See PH-BKT above
for description. For use with PH-SS Series.
|

|
THCS |
Chain mounting set. 5 ft. chain set with four (4) S-hooks
used for hanging heater. Two (2) needed per heater.
|

|
PH-24VAO |
24-volt control add-on. Field supply 24V to control
heater operation (one 24VAO requred per heater). External
transformer (P/N 4000-01V) required. |

|
4000-01V |
40VA external transformer. 40VA transformer 120-25V.
Mounted on a 4x4 base plate. |

|
PLQ |
Clearance warning plaque. Hung below heater, restates
the clearance to combustible warning. |

|
GET BROCHURE |

  



|
| |
AVAILABLE PH MODELS
| MODELS |
GAS* |
BTU/H |
APPROX
COVERAGE |
DIMENSIONS |
WEIGHT |
MOUNTING
HEIGHTS** |
| PH-28(-SS) |
N/LP |
28,000 |
7’ x 7’ |
8.5” | 90" | 45.25” |
^56-lbs. |
8’-0” to 8’-6” |
| PH-31(-SS) |
N/LP |
31,000 |
8’ x 8’ |
8.5” | 90" | 45.25” |
^56 lbs. |
8’-0” to 9’-6” |
| PH-34(-SS) |
N/LP |
34,000 |
9’ x 9’ |
8.5” | 90" | 45.25” |
^56 lbs. |
8’-6” to 10’-0” |
CLEARANCE TO COMBUSTIBLES***
MTG.
ANGLE |
SIDES(S) |
ENDS |
BELOW |
TOP |
BEHIND |
FRONT |
0° |
14” |
22” |
46” |
13” |
N/A |
N/A |
30° |
N/A |
22” |
46” |
17” |
8” |
46” |
0° |
14” |
22” |
46” |
13” |
N/A |
N/A |
30° |
N/A |
22” |
46” |
17” |
8” |
46” |
0° |
14” |
22” |
46” |
13” |
N/A |
N/A |
30° |
N/A |
22” |
46” |
17” |
8” |
46” |
* Specify natural (N) or propane (LP) gas.
** Mounting heights are recommended and provided as a guideline
only. Actual conditions may dictate variations from the above
data.
*** Always maintain the published clearances to combustibles.
NOTE: Certain applications (awnings, fabrics, plastics, sprinklers,
insulation) may require the
heater to be mounted at a distance in excess of the published
clearances to combustibles. Contact the factory. IMPORTANT: If
the heater is mounted
beneath a non-combustible surface, an 8 inch minimum top clearance
must be maintained from the top of the heater to prevent overheating
the controls.
^ Shipping weight is 59 lbs. (64 lbs. with PH-BKT). Box dimensions
48”x15”x15”. Truckline transportation is recommended.
PH
SERIES & OPTIONAL MOUNTING BRACKET DIMENSIONS
Optional mounting brackets (PH-BKT) are adjustable in one inch
intervals.
1. Minimum mounting bracket extension to non-combustibles only
is 9 in.
2. Minimum 0° mounting bracket extension to combustibles
is 14.5 in.
2a. Minimum angle mounting bracket extension (up to 30°)
to
combustibles is 17.5 in.
3. Maximum mounting bracket extension is 20.5 in.
WARNING!: To avoid serious injury, property
damage or death, clearances to combustibles MUST be maintained.
OPTIONAL EQUIPMENT
| Mounting Brackets: |
PH-BKT or PH-BKT-SS |
| Clearance Safety Sign: |
PLQ |
| Chain Mounting Set: |
THCS |
| 24V Control Voltage: |
PH-24VAO |
WARNING: To Prevent Serious Injury or Death:
INDOOR/OUTDOOR COMMERCIAL USE AND OUTDOOR RESIDENTIAL
USE ONLY!
This heater is NOT for home or recreational use. DO NOT USE in
the home, mobile home, RV’s, campers, tents, etc. Use only
in a well ventilated area. Consult the Installation, Operation
and Maintenance manual for further information.
|
Top
SUNPAK Patio Heater Specialists
Welcome
We are wholesale distributors for many national brand radiant heating products including Detroit Radiant. We also specialize in commercial patio heaters manufactured by Infrared Dynamics. This web site is specific to the sunpak and sunglo product lines. Our goal is to provide as much information as possible to our customers so they can make informed buying decisions. Whether its dealing with the homeowner, heating contractor or a national restaurant chain, we're experts in our field.
Overview
The SUNPAK patio heater provides radiant warmth for you, in a wide variety of applications.
Two basic SUNPAK models are available. The model S25, with an input rating of 25,000 BTUH, is suitable for patios with a medium ceiling height. The
model S34, with an input rating of 34,000 BTUH, will cover a slightly
larger area, but requires a higher ceiling. In a moderate climate,
SUNPAK can be expected to raise the outdoor comfort level up 10 degrees. The
S25 heater typically covers a 10 foot x 10 foot area. The S34
heater covers approximately a 12 foot x 12 foot area. Coverage
will vary with ambient temperature, wind chill, mounting height and
tilt angle of the heaters.

Sunpak Installation Guide
Please call for discount
pricing on Sunpak heaters

Top
Appliance Design
SUNPAK's aluminized or stainless steel enclosure, together with the aluminum face grill, provides resistance to wind and rain. SUNPAK's slim body design (8 x 8 x 48 inches) and 0 to 30 degree angle mounting option on most models, gives SUNPAK the versatility to fit easily into a wide variety of patio situations. An optional mounting kit (part no. 12006-#) is available. Code Compliance
The SUNPAK patio heater is design certified by the CSA International as an unvented infrared heater for outdoor or indoor installation. All units are equipped with spark ignition and 100% shutoff for safety, economy, and convenience.
Part No.
Model
BTU/Hr. Gas Type
12001-2 S25 Nat AGA Black
25,000 Natural
12202-2 S34 Nat AGA Black
34,000 Natural
12003-2 S25 LP AGA
Black 25,000 Propane
12004-2 S34 LP AGA
Black 34,000 Propane
12006-2 Mounting Kit - Black
12001-4 S25 Nat AGA
SS
25,000 Natural
12002-4 S34 Nat AGA
SS
34,000 Natural
12003-4 S25 LP AGA
SS
25,000 Propane
12004-4 S34 LP AGA
SS
34,000 Propane
12006-4 Mounting Kit - Gray |
SUNPAK® Heater Placement Chart
(moderate to warm climates)
| |
O |
|
H |
S |
A |
G |
C |
I |
Model
No. |
Angle
Mount |
Btu Input |
Mount
Height |
Heater
Spacing |
Area
SqFt |
BTUH/SqFt |
Cleanrance to
Combustibles |
Total Height |
S25 |
0° |
25,000 |
8 |
8 |
64 |
391 |
8" |
8' 8" |
S25 |
0° |
25,000 |
9 |
10 |
100 |
250 |
8" |
9' 8" |
S25 |
0° |
25,000 |
10 |
12 |
144 |
174 |
8" |
10' 8" |
S25 |
30° |
25,000 |
7* |
10 |
100 |
250 |
14" |
8' 2" |
S25 |
30° |
25,000 |
8 |
12 |
144 |
174 |
14" |
9' 2" |
S25 |
30° |
25,000 |
9 |
15 |
225 |
111 |
14" |
10' 2" |
S34 |
0° |
34,000 |
9 |
10 |
100 |
340 |
13" |
10' 1" |
S34 |
0° |
34,000 |
10 |
12 |
144 |
236 |
13" |
11' 1" |
S34 |
0° |
34,000 |
11 |
15 |
225 |
151 |
13" |
12' 1" |
S34 |
30° |
34,000 |
8 |
10 |
100 |
340 |
18" |
9' 6" |
S34 |
30° |
34,000 |
9 |
12 |
144 |
236 |
18" |
10' 6" |
S34 |
30° |
34,000 |
10 |
15 |
225 |
151 |
18" |
11' 6" |
* Possible head clearance problem.
Note: All mounting height measurement taken from the top of the heater.
  
DCS Del Ray Comfort Heater DRH48N 58k BTU

 | DCS DRH48N Patio Heater 70034 58,000 BTU/hr
Don't let chilly weather prevent outdoor dining. DCS offers an infrared mounted patio heater that hooks up to a natural gas line. It is constructed of quality stainless steel that provides a weatherproof exterior. This heater is easily controlled with a wall-mount switch and comes standard with extensions, mounting kit, and transformer. (OPTIONAL remote control switching available) The DEL RAY emits 58,000 BTUs of heat from the eaves or awnings to provide a comfortable atmosphere. CLICK HERE FOR PDF CUT SHEET
- 58,000 BTU/hr
- Stainless Steel only
- 48" Long x 10.5" Wide x 7 3/4" Tall
- Shipping Dimensions/Weight 53.25"L x 14.33"W x 11.85"H
- 51.6LBS.
- Price includes mounting brackets and transformers
PRICE $939.00 
|
Top
Natural Infrared Heaters
FS20 Industrial Heater |
|
|
| |
-
CSA Design Certified (Formerly A.G.A)
-
6-BTU/H Inputs in both Natural & LP Gas
-
24-Volt Operating Voltage
-
Easy mounting via chains & 'S' hooks
-
Cast Aluminum Modular Burners
-
Bright Polished Aluminum Reflectors
-
Designed 8 ° angle mounting
-
Corrosion free aluminized housing
-
Limited 1 Year Warranty
|
| NATURAL GAS |
LP GAS |
BTU/H
Input |
Ship Wt.
(Lbs.) |
UPC 686334 |
Model #
(Control) |
UPC
686334 |
Model #
(Control) |
|
| HIGH INTENSITY GAS INFRARED HEATERS |
481892 |
FS20 NED |
481915 |
FS20 PED |
20,000 |
20 |
481939 |
FS40 NED |
481953 |
FS40 PED |
40,000 |
28 |
481977 |
FS60 NED |
481991 |
FS60 PED |
60,000 |
36 |
482011 |
FS80 NED |
482035 |
FS80 PED |
80,000 |
44 |
482059 |
FS100 NED |
481830 |
FS100 PED |
100,000 |
52 |
481854 |
FS120 NED |
481878 |
FS120 PED |
120,000 |
60 |
481908 |
FS20 NSG |
481922 |
FS20 PSG |
20,000 |
20 |
481946 |
FS40 NSG |
481960 |
FS40 PSG |
40,000 |
28 |
481984 |
FS60 NSG |
482004 |
FS60 PSG |
60,000 |
36 |
482028 |
FS80 NSG |
482042 |
FS80 PSG |
80,000 |
44 |
481823 |
FS100 NSG |
481847 |
FS100 PSG |
100,000 |
52 |
481861 |
FS120 NSG |
481885 |
FS120 PSG |
120,000 |
60 |
"Marquee" Style High Intensity Gas Infrared Heaters |
888363 |
FLM40 NESD |
Natural Gas
Only |
40,000 |
47 |
888370 |
FLM60 NESD |
60,000
|
56 |
Top
Accessories |
| Model # |
Description |
| RK120EAA |
24 Volt Thermostat: - Dim. 3"x3"x1.3" |
| TW141 |
120 Volt Thermostat: Single Pole -22Amp Dim. 4.5" x 2.75" x1.5" |
| CMK |
Mounting Chain kit: (2) 8 ft. Chains @ 90 lb. Rating, (4) S-Hooks |
| GBV-1/2 |
1/2" NPT Gas Ball Value with 1/8" NPT Pressure Tap |
| FH-1/2 |
1/2" x 24" Flex. Gas Supply Hose w/o Shut-off Value |
|
 |
|
| Specifications |
| Series |
FS20 |
FS40 |
FS60 |
FS80 |
FS100 |
FS120 |
| Clearance to Combustibles - Inches |
| Side |
36 |
36 |
36 |
36 |
36 |
36 |
| Rear |
36 |
40 |
40 |
40 |
40 |
40 |
| Top |
36 |
40 |
40 |
40 |
40 |
44 |
| Below |
36 |
48 |
72 |
108 |
108 |
108 |
| Recommended Mounting Height - Ft. |
| 0-20° Deg. |
8- 12 |
10- 16 |
12- 20 |
14- 24 |
16- 28 |
18- 30 |
| Dimensions - Inches |
| L-Length |
16- 1/4 |
22- 1/2 |
28- 3/4 |
35 |
41- 1/4 |
47- 1/2 |
| W-Width |
20- 1/2 |
20- 1/2 |
20- 1/2 |
20- 1/2 |
20- 1/2 |
20- 1/2 |
| H-Height |
11- 1/2 |
11- 1/2 |
11- 1/2 |
11- 1/2 |
11- 1/2 |
11- 1/2 |
|
 |
|
Top
| Control Options |
| NED |
Natural Gas, Direct Spark Ignition, 24V Operating Voltage.(120 /24V Transformer Included.) |
| PED |
LP Gas, Direct Spark Ignition, 24V Operating Voltage. (120 /24V Transformer Included.) |
| NSG |
Natural Gas, Manual Pilot Ignition Via Self-Generating Power Supply. (Millivolt Thermostat Supplied) |
| PSG |
LP Gas, Manual Pilot Ignition via Self Generating Power Supply. (Millivolt Thermostat Supplied) |
| NESD |
Natural Gas, Electric Spark Intermittent Pilot Ignition. 24 V Operating Voltage. (FLM Series Only) |
|
 |
|
Top
|
|
 |