Home :: Forced Air Fan Heaters :: 3.3kw-100kw Horizontal or Vertical Discharge Fan Forced Suspended Unit Heater

3.3kw-100kw Horizontal or Vertical Discharge Fan Forced Suspended Unit Heater

3.3kw-100kw Horizontal or Vertical Discharge Fan Forced Suspended Unit Heater
3.3KW - 100KW HORIZONTAL OR VERTICAL
DISCHARGE FAN FORCED SUSPENDED UNIT HEATER

***DUE TO THE VAST SELECTION OF THIS HEATER, WE HIGHLY RECOMMEND CALLING AND SPEAKING WITH ONE OF OUR TRAINED HEAT SPECIALISTS.*** 800-549-5077

* CONSTRUCTION:
o 18 ga. steel cabinet with powder coated finish and control
compartment housing a master terminal board with a hinged and latched access door, simplifying wiring, installation & maintenance

* HEATING ELEMENT:
o Spiral fin steel element with continuously brazed steel
fins formed to allow side draw through air flow

* OVERHEAT PROTECTION:
o 3.3 - 50 KW units come equipped with automatic reset type limit and 60 - 100 KW units come equipped with manual reset type limit to de-energize the heater should an over-temperature situation occur.

* FAN and MOTOR:
o Totally enclosed, 1-speed, 1-phase, permanently lubricated, thermally protected motors with unit bearings on 3 KW - 20 KW models
o Totally enclosed, 2-speed, 1-phase, permanently lubricated, thermally protected motors with sleeve bearings on 25 KW - 50 KW models; 60 -100 KW have 1 speed motors, ball bearing, thermally protected.
o Fan over-ride purges unit of residual heat at shutdown

* LOUVER ASSEMBLY:
o Louvers are individually adjustable for directional control of air flow up to 15 from straight horizontal
Optional diffusers available for down flow (vertical discharge) applications

* TEMPERATURE CONTROLS:
o Optional low voltage and line voltage thermostats available with an adjustable temperature range of 50-90F
o Units with model numbers ending in CA1 are factory wired for low voltage controls
o 25 KW through 50 KW units are designed for two stage heating operation, 60 - 70KW units designed for up to three
stage and 80 - 100 KW units up to four stage

* INSTALLATION:
o Unit Heaters can be mounted for horizontal or vertical discharge
o 5100 series suggested for applications up to 6000 feet; for
applications up to or above 6000 feet see UH series

* FIELD INSTALLED OPTIONS:
o In-Built or wall mounted temperature control thermostats - low or line voltage
o Summer fan switch to operate the fan only.
o Power disconnect switch
o 60-100KW units can be multiple stage when used with optional SC5100 and C1025 stat
o Heat stratification thermostat

***UNIT PRICED HERE IS THE 3.3kw 11.2 BTU 240/208volt 400 cfm model.***

FOR LARGER MODELS, PLEASE CONTACT US 800-549-5077 and speak to a Heater Specialist.
Details
SKU #F2F5103N
 
Our price: $430.00
Options
Quantity
Deluxe LPG Fire Sense Patio Heaters 47,000 BTU
Main Burner Emitter Screen 10 1/4" (3 post application)
Bromic Tungsten Smart-Heat Gas
Deluxe LPG Fire Sense Patio Heaters 47,000 BTU Main Burner Emitter Screen 10 1/4" (3 post application) Bromic Tungsten Smart-Heat Gas
$299.00
$120.00
$1049.00
 
Firesense Copper Finish Standard Patio Heater 02412
SunPak Classic Nat Gas or Propane S-25 & S-34
Regulator (Prior to 2008)
Firesense Copper Finish Standard Patio Heater 02412 SunPak Classic Nat Gas or Propane S-25 & S-34 Regulator (Prior to 2008)
$280.00
$1369.00
$62.00
 
Heavy Duty Waterproof Tall Patio Heater Cover
Deluxe Aluminum Chiminea/Fireplace w/ Wrought Iron Stand & Firescreen
Sunglo 24v permanent mount
Heavy Duty Waterproof Tall Patio Heater Cover Deluxe Aluminum Chiminea/Fireplace w/ Wrought Iron Stand & Firescreen Sunglo 24v permanent mount
$95.00
$189.00
$1149.00
GS-21F-162-AA