Calcana Infrared Commercial Heater A Model
TO VIEW OUR HOME PAGE, CLICK WHERE IT SAYS GasOutdoorPatioHeaters.com above in the red! Experience a Calcana Heatwave today!
- Home freight delivery requires unloading capability/assistance
THE STANDARD A SERIES GARAGE, SHOP, PATIO, HEATER FROM CALCANA WITH ADJUSTABLE HEAT RANGES and VENTABLE.
Available in 11.5' 16.5' and 21.5' 40K to 75K btu**FREE SHIPPING TO A COMMECIAL ADDRESS
IF YOU NEED HELP ON PLACMENT AND DESIGN OF ANY PATIO OR COMMERCIAL HEATER PLEASE CALL MIKE 760-779-1352
This heater is more for shops, garages and warehouses or enclosed patios and patios with plastic windows and wind shades. These are ventable for locations that have little to no ventalation so you can get the gases out and keep the heat in.
Calcana Model PH50A (commercial gas outdoor heater) installed at Abernethy's (LA Music Center)
FEATURES OF THE CALCANA A MODEL COMMERCIL HEATERS INCLUDE:
SAFELY ENCLOSED FLAME:
The flame is protected from wind and is located inside the Low Intensity Infrared Emitter Tube. This tube captures heat energy contained in hot glue gases and turns the energy into comfortable HEAT waves.
LOW CLEARANCE TO COMBUSTABLES:
Can be safely installed in locations with awnings. Within 6"
SLIM, NARROW DIMENSIONS:
Easy to install in narrow, low overhead clearance locations; suitable for long, narrow street side patio locations or small werehouse spaces.
No floor space is lost as units hang from existing trellis or otheroverhead structures. Units can also mount to walls at an angle.
VARIABLE HEAT INPUT BURNER:
Patent pending, variable input design provides the right level of heat output for each location and is adjustable.
FOUR LENGTHS TO CHOOSE FROM:
11.5' 16.5' or 21.5' FOOT LENGTHS ARE AVAILABLE. Multiple units can be grouped together to achieve any length required.
EXCLUSIVE PERIMETER POST & TRAC SYSTEM:
Provides an overhead installation solution without compromising floor space. Architectural and functional design allows for easy customization. Lighting, fans and flower baskets can be easily attached to the structure.
CERTIFIED FOR OUTDOOR & INDOOR APPLICATIONS:
Units are design certified to operate in outdoor environments, which include wind, rain, snow and temperatures as low as -40F. For indoor applications, the units can be safely vented through the wall or roof.
EASY-LIGHT IGNITION SYSTEM:
No pilot lights to ignite by hand, no valves to turn, no thermo-couples to replace. By using a reliable, 3-Try, direct electronic spark, 100% safety shut off ignition system, units safely and consistently operate in all types of weather with the flick of a switch.
24 VOLT CONTROLS:
Low voltage wall mount controlers included.
No ceramic parts to break or replace. No thermo-couples to replace.Emitter tubes do not glow cherry red, therefore are not fatigued to the point of premature failure.
ECONOMICAL TO OPERATE:
Highly efficient reflectors capture the radiant energy and direct it to the area your intending to heat. Heats more area with less fuel than any other style of commercial heater.
HEAVY DUTY CONSTRUCTION:
High quality materials & workmanship eliminates metal fatigue and reflector warp or separation.
NATURAL GAS OR PROPANE:
Units available for use with either fuel.
Rating (Input: Natural and L.P. Gas) 0-4500 ft elevation.
Gas Pressure at Manifold:
Natural Gas.........................3.5" W.C.
L.P. Gas..............................10.5" W.C.
Gas Connection Size.............0.5" N.P.T.
Gas Inlet Pressure:
Gas Minimum Maximum
Natural 4.5" W.C.14.0" W.C.
L.P.11.5 W.C.14.0 W.C.
120v, 60 Hz, 1 Amps
24 volt low voltage On/Off Hi/Lo control panel included.
Variable input temperature control panel, modulating gas burner, low noise combustion air blower, visual burner inspection sight glass, air proving safety switch, 3-try spark ignition control, 100% safety shut off valves, 4"heat treated aluminized radiant emitter, aluminum reflector, heat economizer baffle, stainless steel hangers and burner-head, decorative grill, indicator light. Stainless steel construction on High Output Series.
Elbow kit / 180 degree U-Bend kit for PH-50 and PH-75
** Venting Kits are an optional item for enclosed areas. No venting Kit is required for well ventilated areas
Outdoor Heater Mounting Options
Brackets work with all Calcana outdoor / indoor High output, Standard, Marine Grade natural gas or liquid propane Heaters.
Mounting options provide an overhead installation solution without compromising floor space.
Cantilever wall mount brackets extend out 25 1/2" at a 90° angle
25° Angle Brackets are ceiling mounted allowing Calcana units to be mounted at a 25° pitch.
Can be used with a 4" extension as shown in the above picture.
Horizontal mounting allows the heaters to project straight downward. Can be used with a 4" extension
as shown in the above picture.
Tilt brackets are 12" long and put the heater at a 25° Tilt.
Select ModelChoose From Below, PH-40A BTU/Hr:20,000-40,000 Length:11.5', PH-50A BTU/Hr:25,000-50,000 Length:16.5', PH-75A BTU/Hr:37,500-75,000 Length:21.5'
Add Brackets for PH 40A HeaterSelect Bracket Style Below, Wall Mount 25 Degree, Ceiling Mount 25 Degree, Ceiling Straight Down
ShippingShip To:, Commercial, Residential
Add Brackets for PH 50-75 Model 3 Hang PointSelect Bracket Style Below, Wall Mount 25 Degree PH 50-75 3 Hang Points, Ceiling 25 Degree PH 50-75 3 Hang Points, Ceiling Straight Down PH 50-75 3 Hang Points
Gas TypeChoose From Below, Natural Gas, Liquid Propane